After the apparent success of my DIY wheel dishing tool I decided to take on the next obvious project: a wheel truing stand. I currently have seven bikes. That makes 14 wheels to maintain not counting the bikes of my other family members. I could do this at the local bike co-op but it is often not convenient for me to get down to that end of the city. I’ve trued wheels while they are on the bike but it isn’t as easy as using a stand. The commercially available stands I’ve seen start at about $80 for the cheaper ones and are more than $200.00 for a good one. Naturally, a DIY version appeals to my frugal soul.
As an exercise in re-purposing I decided to build it as much as possible from scrap metal parts I could salvage from the scrap bin at work. This proved to be something of a constraint during the design process but it was a fun and satisfying bit of problem solving. You can really do a lot with materials that would otherwise end up at the scrapyard.
The salvaged materials I used were a length of anodized aluminum channel, some slightly twisted steel shelving uprights, a short length of threaded rod and a few carriage bolts. The nuts and 4 small bolts were purchased or sourced from my own supply. To paint the stand I used surplus stock of a colour we no longer use at work.
I had a few false starts and had to rethink things more than once. I would have done things differently if I were buying the materials instead of working with what was at hand, but I’m quite happy with the results.
While building this stand dusty childhood memories returned of playing with odds and ends of meccano left over from one of my older siblings. The finished product does have a meccano-like quality, I believe.
That’s fantastic. I’ve had no end of problems with truing my wheel this summer and something like this would have been great to have in the garage. I just can’t break down and pay the money for a store-bought truing stand. This is a great alternative.
LikeLike
Thanks! I’m looking forward to using it . If you google “DIY truing stand” you’ll find lots of different ways that people have made them.
LikeLike
this looks do-able – i am not happy making one using wood or mdf and feel for most home mechanics this is an adequate stand.
LikeLike
It has worked fine for me so far. I have trued several wheels of various sizes without problems. I also built my first wheel using it a couple of months ago.
LikeLike
in fact off to rummage around in the garage now ……………….
LikeLike
Good luck!
LikeLike
This blog post has given me a few ideas, I had a problem after a small accident a while ago and the shop was a bit funny about fixing it but they did it anyway, I don’t like having to deal with shops all the time so a wheel truing stand like this is a great idea. I’m probably giving myself too many projects to do though if I did this!!
Ben
LikeLike
I completely understand about having too many projects to do. I am a big fan of doing bike work myself. The truing stand worked well and I was able to build my first wheel using it. There are a few small changes I might make, however.
LikeLike
Great idea – I’d like to have a go at building one of these.
LikeLike
im giving this a go.. wonder what changes you have made..
LikeLike
I pretty much just used it without making any changes so far. I still think the radial gauge is clunky but it does work. I’ve trued wheels in it several times and I used it for my first few wheel builds as well. I haven’t actually used it much recently because our local bike co-op opened a shop in my neighbourhood.
It’d be great if you could let me know how it works out for you. Thanks for commenting.
LikeLike
Hey, can you contact me? I have some questions to ask.
LikeLike
OK
LikeLike
WOW this is EXACTLY the type of Idea I’ve been looking for! I DIY everything I can, bc shopping is for suckers and the bourgeois lol (sometimes you have to). Ive been searching for truing stands, thinking a “good/decent” one would be like “eh maybe $100 at the most, wtf it’s just some cheap ass metal and low end indicators right?” WRONG! A G-Zilla staggering price of “eh about ~250 wit tax kid meh, heh, heh…” WTF I thought, I was “how it’s made” and have been DIY’ing since I was a child and I KNOW it does not cost ~$230+ to make a “GOOD” truing stand from metal and some gages — I just couldn’t get the motivation to attempt a DIY; until I found your page!
This just goes to show you how everything people buy is over-priced and marketed to them, so they think they are getting a deal, when IRL that are getting ripped off! The parts are simple to acquire as well, from what I see. I can make this with just a drill press and a Dremel! Excellent, now I have a new project! I’m gonna clown everyone on the forums that spend mints on Park tool excess scrap! THANKS!
BTW- Do you have any schematics for this, so I can duplicate it exactly, or better yet, how do you set up the truing gages once you have the whole think assembled? This NEEDS to be on instructibles.com
LikeLike
This stand worked pretty well for me truing quite a number of wheels and on my first couple of wheel builds. Although it was inexpensive to build and is functional it is not as convenient to use as a manufactured stand like the Park one.
I didn’t draw up any plans as I was really just making it up as I went along and using whatever scrap material was at hand. I’m not sure specifically what you mean by setting up the gauges but I will try to provide some further information if you can let me know what details you are looking for.
Thanks for commenting.
LikeLike
Hi, this is nice option than buying those expensive truing stand. May I asked the dimension of this. How tall and how long those perf. angle. or if you have the complete specs will appreciate it. Thanks
LikeLike
Can you give us the dimensions of the elements?
LikeLike
I didn’t really write anything down when I built it, but I could certainly measure any specific parts you are interested in.
LikeLike
Reblogged this on Three Speed Mania and commented:
Here’s an inexpensive home made truing stand.
LikeLike
Thanks for sharing, I plan to build one today similar to yours.
LikeLike
This is great mate. I am a bike mechanic and have trued a few wheels either on bike or using the trainer stand. This would make it so much easier and may even have a go at building wheels.
LikeLike
Awesome Job. I didn’t have the scrap but bought very cheap at local hardware. Thanks for sharing your project.
LikeLike
Cool! Glad it was helpful.
LikeLike
Great idea 🙂 i’ll try to build one. First I need to look for materials hope can find it in the construction site. 🙂
LikeLike
Awesome truing stand! I’ve been using the fork in a vice method to true my wheels and would love to build something like this instead. Any chance you could provide length measurements for the 4 pieces of steel shelving you used?
LikeLike
Nice work! I’m inspired. I’ll stay squirrelling away materials for one of my winter projects.
LikeLike
This is inspirational and excellent work!
I’m just about to build my first wheel and will be putting one of these together, thought I would do the front in an old fork, this is a far better solution and covers off some of the obscure widths in French axles.
Fortunately, I have the 1800 long shelf angle sitting in the corner from a previous aborted project, the box aluminium channel and nuts and bolts are all else required.
Seems that most of the retail offerings are either very flimsy (alibaba/ebay) or far too expensive to justify (dial gauged $1500+), Park tools sit in the middle at $4-500AUD – still not cheap. I think this design will be comparable in function for a fraction of the price. Well done.
LikeLike
Awesome! Thanks for sharing. I take unwanted/donated bikes to fix and give to kids who have none. Too many times I’ve had to set aside wheels due to needing to be trued. Now, I can make one of these to do it myself. Thanks again
LikeLike